|
SAMPLE
SPECIFICATION GUIDELINE: |
|
Item # 1A: MULTI VIEW CAMERA 1.
This color camera shall be a stationary mount pan, tilt, and zoom
camera. The camera is to be mounted on a stationary structure such as
a pole, site trailer, or existing building. The camera shall be
capable of panning 170 degrees, tilting 30 degrees, and a 12-power
zoom lens. 2.
This camera shall posses the ability to be programmed to a maximum of
8 preset positions by qualified ProjectView personnel. Camera and
components will off a site view on the Internet that may be updated a
minimum of four times per hour. A daily image of the site will be
archived on the ProjectView servers such that an entire project
animated GIF video may be provided on CD upon job completion. 3.
This camera shall be supplied with high quality lens equipped with
auto iris to protect camera components from UV damage and offer high
quality views. A polarized shield will be provided for the protective
dome enclosure. ProjectView systems will be provided with 12-volt AC
power adapters and the appropriate corresponding UPS systems and or
surge protection devices. 4.
Standard mounting hardware will be provided with installation.
Protective enclosures specifically designed to protect cameras and all
associated hardware from potentially damaging weather conditions will
be provided. Cooling fans and heaters shall be included in all
enclosures. 5.
Included in this service shall be a project specific web site and
Internet address. This site may be linked to other sites if approved
by the owner. The web site may be available for public viewing or may
be secured with access afforded to only those with authorized
passwords. ProjectView will provide all access necessary to the
appropriate local Internet Service Provider. 6.
Camera requires a 110v duplex power outlet in close proximity to the
installation. At a minimum the connectivity required to the component 7.
ProjectView will arrange and coordinate selection and installation of
high-speed access if available and desired. |
|
1.
ProjectView “Showcase” is a special software package that enables
digital images to be uploaded to a project specific web site as
needed. Authorized individuals, with password protected access, may
update digital images to their web site from any Internet connected PC
at any time. A bank of 45 images is the standard package relative to
each site and may be changed at any time. 2.
The project specific web site will be designed and hosted by
ProjectvView Services. Images will be available for authorized viewing
by without the need for e-mail access. Images are located on a secure
server. By locating the site on ProjectView servers neither storage
space nor security issues are associated with client internal systems.
3.
Job superintendents may acquire images and upload in a matter of
minutes for owners, architects, project managers, subs, etc. to view. |
|
Item # 1C: WEATHER MONITORING DEVICE 1.
ProjectView will supply a Weather Monitor #2 with additional hardware
and components to enable system communication through local Internet
Service Providers to the ProjectView servers. 2.
Information gathered and accumulated will be stored and made available
for access by authorized personnel. The remote monitoring device shall
be mounted on a galvanized pole. Each unit shall contain a
weather-resistant shelter with junction box and or sensor interface
module. An AC power adapter shall be provided for the monitor system
and for the site LCD console. 3.
The system shall be NIST certified and all information gathered will
be time and date stamped and archived on ProjectView servers.
Information shall be gathered and logged hourly. All data gathered
shall be available to the owner and the complete project archive will
be presented upon project completion. 4.
Rainfall gathered at the monitoring device shall be accurate within
.01 inches. Outside temperature shall be accurate to .05 degrees
Mercury. Anemometer shall be certified accurate within 5% at wind
speeds less than 75 mph. 5.
System shall be delivered, mounted and installed by trained authorized
personnel. Ethernet 10 Base TRJ45 twisted pair wiring. Real time
digital display console shall be placed in a convenient location.
(Preferably job site trailer) 6.
Monitor system requires an 110v duplex power outlet in close proximity
to the installation. At a minimum the connectivity required to the
components shall be a standard business phone line. DSL, cable, ISDN,
T1, or other high-speed access is acceptable. 7.
ProjectView will arrange and coordinate selection and installation of
high-speed access if available and desired. 8. A completed project CD will be provided with all weather data accumulated in the archives. |
Item
# 1B: 